Skip to content
IndonesiaCharcoal

Coconut charcoal cubes

Coconut shell shisha cubes pressed in 22, 25, 26, and 27 mm, the reference hookah format, made to one spec for lounges and retail brands.

Most searches for hookah charcoal end at a cube, because the cube is what lounges stack on foil, what heat management devices are sized around, and what retail boxes are printed for. We press four sizes, from 22 to 27 mm, on one line and to one spec: 80% fixed carbon, white ash at 1.9% maximum, 5% moisture, and ignition in about 7 minutes.

Which cube size should you take: 22, 25, 26, or 27 mm?

The lounge and retail standard is 25 mm (C25), and it is the safe first order. Deep-chambered heat management devices do better on 26 or 27 mm (C26, C27), which hold heat beyond 110 minutes without a third cube. The 22 mm cube (C22) suits small phunnel bowls and markets that price by the cube rather than by the kilo. All four come off the same line, so a brand can carry two sizes with identical ash colour and odour.

How long do coconut charcoal cubes burn?

Roughly 80 minutes for a 22 mm cube, rising to 125 minutes for a 27 mm cube. Three cubes reach working temperature in about 7 minutes on a coil burner and settle around 650°C, with ash that stays white and compact through the session. Since burn time follows mass, suppliers must be compared on the same size and the same fixed carbon figure, or the comparison is meaningless.

What should a good coconut cube look like after it burns?

White ash still holding the cube shape, no black core, no sparking at ignition, and no smell at any stage. A black core points to underpressing or a wet centre, grey ash to high mineral content or contaminated shell, and a smell on lighting to excess binder or volatile matter. We hold volatile matter to 14% maximum and pull any batch that fails the burn check before it reaches packing.

How are cubes tested and documented?

Each pressing batch is sampled and burn-tested in-house, and the certificate of analysis for your container quotes the batches loaded. SGS, Sucofindo, or Carsurin pre-shipment inspection can be booked at cost. The MSDS and the self-heating test report go with every booking, so the carrier accepts the cargo under IMDG Class 4.2.

How are the cubes packed, and how do I place an order?

Inner boxes of 500 g, 1 kg, or 3 kg in 10 kg to 20 kg master cartons, printed to your artwork once proofs are approved, or neutral for trials. The minimum order is one 20 ft container of about 18 t, which can mix cube sizes and other shisha formats. Samples up to 1 kg ship free, quotes go out within 24 hours, and lead time to loading is 1 to 4 weeks.

Product FAQ

Ordering, testing, and shipping for this line.

What is the minimum order quantity?

One 20 ft container, loaded to about 18 t. A 40 ft holds about 26 t, and larger quantities earn a discount. We do not ship LCL or pallet lots, although a mixed-product container is fine for a trial.

Can I get samples before ordering?

Yes. Samples up to 1 kg are free, with the shipping on your account. Larger samples are charged at a minimum price. Ship collect on your own DHL or FedEx account, or ask us for a quote from our preferred courier.

What is the production lead time?

Typically 1 to 4 weeks from order confirmation to loading, depending on the quantity and the orders already in production. Peak season slots in Q3 and Q4 should be booked in advance.

What payment terms do you accept?

A 30% deposit on order and 70% against the shipping documents. On programme contracts we accept an irrevocable LC at sight. First orders are not shipped on open account.

How do I know the spec is genuine?

Each batch is tested in our own lab, and the container CoA quotes the batches that were loaded. On request we book SGS, Sucofindo, or Carsurin for pre-shipment inspection and factory audit at cost, and the MSDS and self-heating test report are issued before the vessel sails.

What packaging options exist?

Shisha lines go in 500 g, 1 kg, and 3 kg inner boxes packed into master cartons. BBQ lines go in 3 kg, 5 kg, 10 kg, and 20 kg bags. Lump and fines go in PP bags, kraft bags, and 1 t jumbo bags. Above the design minimums, any product can carry your branding.

Do you produce under private label?

Yes. Any product in the catalogue can carry your branding: your artwork on inner boxes, bags, and master cartons, printed to your dieline once proofs are approved. Mixed containers under one label are a routine way to launch a range.

Which Incoterms and ports do you work with?

FOB Jakarta (Tanjung Priok) or Semarang as standard, CIF or CFR to the major ports on request, and EXW for buyers running their own forwarders. The MSDS and the non-self-heating test report carriers require under IMDG Class 4.2 come with every booking.

Send us your spec. Quote back within 24 hours.

Give us the application, the monthly volume, and the destination port. You get price, lead time, and a sample plan in return.